IMPLEMENTASI SENSOR WARNA UNTUK SISTEM SORTIR DAN PENGISIAN BOTOL OTOMATIS BERBASIS PLC DAN ESP32
DOI:
https://doi.org/10.71282/jurmie.v2i11.1116Keywords:
Color sensor, ESP32, PLC, Automation, Bottle fillingAbstract
This research aims to develop an automated bottle filling and sorting system based on the TCS3200 color sensor, ESP32, and PLC. The system is designed to detect the label color of the bottle to determine the type of liquid to be filled either orange or lychee flavored drink and to automatically sort the bottles into the appropriate lanes. The automation process includes proximity sensors for bottle detection, a motor pump for liquid filling, and servo motors for sorting. Test results show that the system accurately detects colors and performs filling and sorting processes effectively, with a success rate of over 90%. However, some issues occurred in the capping and sorting stages due to mechanical or communication errors. This study demonstrates that the integration of ESP32, PLC, and color sensors offers an efficient and accurate solution for drink bottle production processes.
Downloads
References
[1] D. Firmansyah et al., “SIMULASI SISTEM KENDALI PENYORTIR BARANG OTOMATIS WARNA DAN NON WARNA MENGGUNAKAN OPTIC DIFFUSE SENSOR YANG BERBASIS PLC GLOFA GM4-PA2A”, doi: 10.5281/zenodo.8167030.
[2] H. Choiri, “Rancangan Pengisian cairan berdasarkan warna botol dengan sensor TCS230.” [Online]. Available: https://www.researchgate.net/publication/366320521
[3] P. Rizky, J. Kusuma, I. Ketut Parti, I. Ketut Darminta, and N. Mudiana, “Kajian penerapan PLC untuk meningkatkan produktivitas proses pengisian air dan penutup botol otomatis,” Journal of Applied Mechanical Engineering and Green Technology, vol. 3, pp. 64–70, 2022, [Online]. Available: https://ojs2.pnb.ac.id/index.php/JAMETECH
[4] R. Ardianto, B. Arifin, and E. N. Budisusila, “Rancang Bangun Sistem Pengisian dan Penutup Botol Otomatis Berdasarkan Tinggi Botol Berbasis Programmable Logic Controller,” JTEV (Jurnal Teknik Elektro dan Vokasional), vol. 7, no. 1, p. 114, Jun. 2021, doi: 10.24036/jtev.v7i1.112194.
[5] A. Nur Fitri, W. M. Faizal, and J. Teknik Elektro Politeknik Negeri Bengkalis, “Politeknik Negeri Bengkalis,” 2023.
[6] A. Lumbantoruan, D. Aswan Amran Ritongan, M. Arifin, and P. Studi Teknik Elektro, “Jurnal Mesil (Mesin, Elektro, Sipil,) Desain Analisis Alat Penutup dan Pengunci Tutup Botol Otomatis Berbasis PLC Pada Mesin Filling Bottle,” vol. 3, no. 2, pp. 6–10, 2022.
[7] T. Taali, A. V. Wati, H. Habibullah, and J. Sardi, “Pembacaan RGB Warna Terhadap Lima Warna yang Berbeda pada Sensor TCS34725,” JTEIN: Jurnal Teknik Elektro Indonesia, vol. 4, no. 1, pp. 84–90, Feb. 2023, doi: 10.24036/jtein.v4i1.352.
[8] S. Wulandari and B. Satria, “Rancang Bangun Alat Pendeteksi Warna Menggunakan Arduino Uno Berbasis IoT (Internet Of Things),” Paradigma - Jurnal Komputer dan Informatika, vol. 23, no. 1, Mar. 2021, doi: 10.31294/p.v23i1.9861.
[9] I. Lutfi, D. P. Sari, and A. S. Larasati, “Automatic Bottle Closure System Based on Programmable Logic Controller”, doi: 10.24036/tip.v15i1.
[10] D. Anggraini, A. Fery, and R. M. Fajri, “PENYORTIRAN BUAH TOMAT BERDASARKAN TINGKAT KEMATANGAN MENGGUNAKAN SENSOR WARNA TCS3200.”
[11] M. Anisah and D. Roatul Adawiyah, “Automatic Bottle Filling System Based on Programmable Logic Controller,” 1993.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Muharram Khadafi, Iskandar Lutfi, Johansyah Al Rasyid (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
