PERANCANGAN SISTEM PENGENDALIAN PROSES UNTUK PRODUKSI MINYAK DIESEL MELALUI PIROLISIS OLI BEKAS
DOI:
https://doi.org/10.71282/jurmie.v3i1.1639Keywords:
Used lubricating oil, pyrolysis, diesel oil, process control, operational safetyAbstract
Waste lubricating oil is classified as hazardous and toxic waste (B3) with the potential to cause environmental pollution; however, it still contains hydrocarbon fractions with significant energy value that can be utilized as liquid fuel through a pyrolysis process. In the preliminary design of a diesel oil production system from waste oil pyrolysis, process control becomes a critical aspect due to the high operating temperatures and the involvement of gas formation and significant phase changes. This paper presents the design of a process control system for converting waste lubricating oil into diesel oil through pyrolysis. The main variables analyzed include temperature, pressure, feed flow rate, and reaction residence time, as well as supporting variables in the product separation units. The results indicate that the implementation of an integrated process control system is capable of maintaining operational stability, enhancing process safety, and preserving the quality and continuity of diesel oil production. Therefore, the proper design of a process control system at the preliminary stage plays an important role in supporting safe, stable, and efficient plant operation.
Downloads
References
[1] R. Fitriyanti, “PRODUKSI BAHAN BAKAR CAIR HASIL PIROLISIS MINYAK PELUMAS BEKAS PERTAMBANGAN BATUBARA MENGGUNAKAN KATALIS ZEOLITE,” Redoks, vol. 5, no. 1, p. 1, May 2020, doi: 10.31851/redoks.v5i1.3958.
[2] R. Y. Parapat et al., “Optimized Synthesis of FeNi/TiO2 Green Nanocatalyst for High-Quality Liquid Fuel Production via Mild Pyrolysis,” J. Kim. Sains Apl., vol. 26, no. 10, pp. 391–403, Dec. 2023, doi: 10.14710/jksa.26.10.391-403.
[3] H. Ahsan, S. S. Ilhami, and G. Khairunnisa, “PROGRAM STUDI TEKNIK KIMIA FAKULTAS TEKNOLOGI INDUSTRI INSTITUT TEKNOLOGI NASIONAL BANDUNG 2025”.
[4] R. Y. Parapat et al., “Green-Synthesized Nanoflower FeNi Catalysts for Low-Temperature Pyrolysis of Waste Lubricating Oil into High-Quality Diesel-Like Fuel,” Reactions, vol. 6, no. 3, p. 50, 2025.
[5] R. Y. Parapat et al., “Effect of design parameters in nanocatalyst synthesis on pyrolysis for producing diesel-like fuel from waste lubricating oil,” Nanoscale, vol. 16, no. 33, pp. 15568–15584, 2024.
[6] R. Y. Parapat, M. Schwarze, A. Ibrahim, M. Tasbihi, and R. Schomäcker, “Efficient preparation of nanocatalysts. Case study: green synthesis of supported Pt nanoparticles by using microemulsions and mangosteen peel extract,” RSC advances, vol. 12, no. 53, pp. 34346–34358, 2022.
[7] “Rudy Agustriyanto_METODE OPTIMASI PADA SISTEM PENGENDALIAN PROSES TANGKI PEMANAS BERPENGADUK_JTK USU 6(3).”
[8] S. R. Panji, A. Sofwan, S. Sugiarto, and P. Wellyantama, “Implementation of the backpropagation algorithm for predicting relative humidity in digital surface weather observation system,” AIP Conf. Proc., vol. 3351, no. 1, p. 020001, Nov. 2025, doi: 10.1063/5.0299068.
[9] A. Dasa Novfowan, M. Mieftah, and W. Kusuma, “Scada Pada Proses Destilasi Dengan Pengendalian Suhu Menggunakan PID,” elposys, vol. 11, no. 1, pp. 56–61, Feb. 2024, doi: 10.33795/elposys.v11i1.4963.
[10] R. Y. Parapat, “Efficient Pyrolysis of Asbuton to Produce the Liquid Fuel,” in INTERNATIONAL CONFERENCE ON GREEN TECHNOLOGY AND DESIGN (ICGTD), 2022. Accessed: Jan. 29, 2026. [Online]. Available: https://scholar.google.com/scholar?cluster=7601955062341276297&hl=en&oi=scholarr
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Riny Yolandha Parapat, Grace Rafael Haloho, Nola Septiani Pramita (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
